
Types EZH and EZHSO
2
INTRODUCTION
Scope of Manual
This manual provides installation, startup, maintenance,
and parts ordering information for the Types EZH and
EZHSO pressure-reducing regulators and Type PRX pilot
with Type SA/2 pilot supply lter regulator.
Information on other equipment used with this regulator is
found in separate manuals.
Product Description
Types EZH and EZHSO regulators are accurate pilot-
operated pressure balanced, soft-seated regulators.
They are designed for use in high pressure natural gas
transmission/city gate stations, large capacity distribution
systems, and power plant feeds. They provide smooth,
reliable operation, tight shutoff, and long life.
Type EZHSO "Spring-to-Open" version could be used
when other overpressure protection options are foreseen,
for example in a monitor conguration. In this case, in
event of failure, the main regulator will stay completely
open, allowing the monitor to take control. The monitor
could be "Spring-to-Close" to ensure a double protection to
downstream pipe.
Available Congurations:
• Types EZH and EZHSO ("E Body")
Single regulator without slam shut
• Types EZH and EZHSO ("X Body")
Single regulator in a X Body
In case of modication made on a pressure equipment
like cap replacement by a slam shut it's mandatory to
comply to the local codes, rules and regulations.
Contact us imperatively.
• Types EZH OS2 and EZHSO OS2 ("X Body")
Single regulator with integrated slam shut
Pilot Description
Type PRX Pilot
The Types EZH and EZHSO pressure-reducing regulators
can be equipped with a PRX Series pilot mounted on the
main valve for pressure reducing or wide-open monitoring
applications. The PRX Series pressure reducing pilots
have the ability to handle a wide range of setpoints from
1 to 80 bar:
• Type PRX/120:
Outlet pressure range of 1 to 40 bar. The Type PRX/120
can be used as the pilot on single stage pressure reducing
regulators, as the monitor pilot, or as the working pilot in
wide-open monitor systems.
• Type PRX/120-AP:
Outlet pressure range of 30 to 80 bar. The Type PRX/120-AP
can be used as the pilot on single stage pressure reducing
regulators, as the monitor pilot, or as the working pilot in
wide-open monitor systems.
• Type PRX/125:
Identical to the Type PRX/120, except the restriction screw
is removed. The Type PRX/125 can only be used as the
monitor override pilot on working monitor applications.
• Type PRX/125-AP:
Identical to the Type PRX/120-AP, except the restriction
screw is removed. The Type PRX/125-AP can only
be used as the monitor override pilot on working
monitor applications.
• Type SA/2 Pilot Supply Filter Regulator:
The Type SA/2 pilot supply lter regulator provides a
constant pressure supply to the PRX Series pilot of 3 bar
over the set pressure. The Type SA/2 has an integral
5-micron lter. For easy maintenance a block valve can
be installed to separate the regulator from the pilot.
Regulator Options
• Silencer (Figure 22)
The Type EZH silencer (Whisper III) is integrated in the
regulator and is composed of a drilled cage.
The Whisper III silencer is available for DN 25, 50, 80, and
100 and allows a noise attenuation up to 8dB.
• Flow Coefcient Reduction (Figure 16)
The ow reduction is realised by replacement of the
regulator standard seat by a reduction seat ( key 2).
• Type RPE Electrical Pilot Heater (Figure 25)
The Type RPE is used for reheating the gas supplying
pressure reducing regulator pilots. The Type RPE avoids
the inconveniences caused by freezing which can occur
during high pressure drops.
Actuator
The actuator is an integral pressure type. All pressure parts
are designed to resist up to 100 bar. The diaphragm is
strong and can resist to a differential of 100 bar.
Komentáře k této Příručce