
OS2 NACE
8
Pressure
BMS 1 BMS 2
Hook Hook
Normal
Without D2 pin Without D1 pin
contact contact
Decrease With D2 pin contact With D1 pin contact
= Set point Rotation of releasing stem and 1
st
stage trigger
BMS SPRING MAX. ONLY
PMS
Ø wire
P setting (bar)
Type Size box Code
Max. low pt.
Recommended range
(bar)
(mm)
possible
Max. low pt. Max. high pt.
2.0 113 195 0.010 0.015 0.035
2.5 113 196 0.025 0.040 0.080
3.0 113 197 0.045 0.080 0.140
3.5 113 198 0.070 0.070 0.240
162 10
4.0 113 199 0.115 0.140 0.380
Diaphragm
5.0 113 201 0.140 0.300 0.750
5.5 113 202 0.250 0.600 1.3
6.5 114 139 0.450 1.2 2.3
4.5 113 200 1.0 2.0 5.1
071 20 5.5 113 202 2.1 4.0 11.0
6.5 114 139 4.0 8.0 16.0
027 100
5.5 113 202 16.0 16.0 22.0
Piston
6.5 114 139 22.0 22.0 40.0
017 100
5.5 113 202 40.0 40.0 55.0
6.5 114 139 55.0 55.0 100.0
236 35
5.5 113 202 5.5 11.0 22.0
Bellows 6.5 114 139 8.3 16.0 35.0
315 72 5.0 113 201 17.5 35.0 72.0
INTERVALS
∆∆
∆∆
∆1
∆∆
∆∆
∆1
(bar)
0.004
0.005
0.010
0.014
0.018
0.050
0.080
0.170
0.350
0.700
1.6
3.0
6.5
7.0
12.0
1.6
2.5
5.0
OPERATION (BMS)
The pressure of the network to be protected pushes the dia-
phragm, piston or bellows.
The force resulting from this opposes the force (adjustable)
Pressure
BMS 1 BMS 2
Releasing screw Push button
Normal
Without D1 pin Without D2 pin
contact contact
Increase With D1 pin contact With D2 pin contact
= Set point Rotation of releasing stem and 1
st
stage trigger
Releasing by min. pressure
Releasing by max. pressure
coming from the set-point spring.
When pressure varies, the detection rod moves and provokes
releasing by max. or min. pressure.
CONNECTIONS (BMS)
On the mechanism box : 2 H M6x16 screws (code 402018)
BM sealing : Flat O-ring and tight shut O-rings
On the manometric box : 1/4" NPT screwed
Recommended tube: 8/10 mm
The sensing line must be connected downstream of the regulator.
SPRING ADJUSTMENT RANGES
(BMS)
(see definitions page 10)
MAX.
ONLY
Europe, Middle East, and Africa Document Only
Komentáře k této Příručce