Emerson Liebert IntelliSlot 485 Interface Card Rychlý návod stáhnout pdf

Liebert Intellislot

485 Card

With Adapter

Quick Start Guide

INSTALL

• Locate the adapter mounting location in your Liebert equipment.

• Secure the Intellislot 485 Card with Adapter with the supplied screws.

• Connect the equipment's communication cable to the TB1 terminal

block or P1 on the card (See equipment user manual for details).

• Connect a Modbus (RS-485) cable to the TB2 terminal block.

• Connect an input power supply cable to Pins 1 & 2 on the TB3 terminal

block; Pin 1 is at the far left, and Pin 2 is the middle pin.

CONNECT THE CABLE

• Locate the blue serial configuration cable (null modem) that shipped

with the card.

• Connect the configuration cable to the DB-9 port on the card and to a

COM port on your PC.

CONFIGURE THE CARD

• Use terminal emulation software, such as

HyperTerminal

™

, to open a direct connec-

tion to the card. Use the data at right to

configure the emulation software.

•Press Enter for the Main Menu.

• Select the option for 485 Network Set-

tings and press Enter to access the com-

munications settings.

• Enter 1 and press Enter.

• Select Modbus Server to enable the Modbus application.

• At the next screen, enter 3 to access the screen to set the Server ID

(the ID default is 1, but may be any number up to 255).

•Press Esc to return to the Main Menu.

• Enter X and press Enter to exit HyperTerminal, save your changes

and reboot the card.

TB3

(P1: +)

(P2: -)

(P3: NC)

P1 is on

left end of

terminal

block.

TB2

(P1: +)

(P2: -);

P1 is at the

right side of

terminal block.

DB-9

Port

TB1 (P1: +; P2: -); P1 is at the

right side of terminal block.

Emulation Software

Configuration

Baud Rate: 9600

Data Bits: 8

Parity: None

Stop Bits: 1

Flow Control: None

1 2

Shrnutí obsahu

Strany 1 - With Adapter

Liebert Intellislot® 485 CardWith AdapterQuick Start GuideINSTALL• Locate the adapter mounting location in your Liebert equipment.• Secure the Intelli

Strany 2 - Support

Technical Support/ServiceWeb Sitewww.liebert.comMonitoring800-222-5877monitoring@emersonnetworkpower.comOutside the North America:+00800 1155 4499Loca

Komentáře k této Příručce

Žádné komentáře

Emerson Liebert IntelliSlot 485 Interface Card Rychlý návod

Procházejte online nebo si stáhněte Rychlý návod pro ne Emerson Liebert IntelliSlot 485 Interface Card. Emerson Liebert IntelliSlot 485 Interface Card Quick Start Guide Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro ne Emerson Liebert IntelliSlot 485 Interface Card