Emerson SOLATRON Plus Three Phase Power Conditioners Manuál s instrukcemi stáhnout pdf (Strana 6)

Solatron™ Plus Series Instruction Manual • 6

4.0 Installation Instructions

4.1 Unpacking

Upon receipt of the unit, immediately inspect the enclosure(s) and contents for

obvious signs of damage and/or mishandling (loose parts, enclosure dents or

holes). If damaged, photograph the unit, inform the carrier, and contact SolaHD

for a Return Material Authorization (RMA) number.

4.2 Mounting

Theunitmustbemountedonaconcreteoororothernon-ammablesurface.

The minimum spacing around the enclosure must be as indicated in Figure 1 to

ensure adequate ventilation.

FRONT

4″ minimum

clearance

(both sides)

4″ minimum

clearance

(back)

12″ minimum

clearance (top)

Figure 1. Minimum spacing requirement, excluding spacing required for condit

entry/exit.

4.3 Environmental

The following environmental conditions must be met:

•Ambient Temperature: 0°C – 40°C (32°F – 104°F)

•Relative Humidity: 95%, non-condensing

•Surroundingairfreeofammableorcombustiblematerials

•Enclosurenotsubjectedtofallingorsplashingwater,unlessspecicprecautions

have been taken to protect the unit (i.e., NEMA3 or 3R enclosure)

Warning! Failuretocomplywiththeaboveenvironmentalconditions

voidsthewarranty.

1 2 3 4 5 6 7 8 9 10 11 12

Žádné komentáře

Emerson SOLATRON Plus Three Phase Power Conditioners Manuál s instrukcemi Strana 6