Emerson BDS-256XL Uživatelská příručka stáhnout pdf (Strana 99)

Programming Battery Setup for the BDS

18-9

18.3. Battery Setup: Test Parameters (BDS)

String View > Setup|Battery|Test Parameters

The following appear on the Test Parameters dialog box.

Figure 64. Battery Setup - Test Parameters (BDS)

Logging / R-Test Time Mode area - Click the Absolute Date and Time option button to

specify the exact day of the month, from 1 to 28 (29, 30 and 31 are not used), and time the

historical log is updated and the resistance test is performed. Click the Day Interval button to

specify how often (in days) the historical log is updated and the resistance test is performed.

Historical Log area - Click Enable to activate, then complete Period (days) and

Period (time) described below. Specify how often in days or the date and time the voltages,

currents, and temperatures are recorded in the history log.

Period (days) and Period (time) - Either select how often the historical log is updated, or

select the day of the month and time the log is updated.

Resistance Test area - Click Enable to activate, then complete Period (days) and

Period (time) described below. Specify the resistance test interval in days or date and time. If

set to 30 days, resistance is tested every 30 days starting at 12:00 A.M. (midnight). When the

monitor performs a resistance test, it creates a historical log entry. For this reason, you may

want to select a resistance test 14 days away from a historical log entry.

Period (days) and Period (time) - Either select how often the resistance test is performed, or

select the day of the month and time the test is performed.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 204 205

Žádné komentáře

Emerson BDS-256XL Uživatelská příručka Strana 99