Emerson XEV22D Specifikace Strana 7

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 30
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 6
General Warning Introduction • 1
1 Introduction
1.1. General Warning
Please read the following safety precautions and
warnings before using this manual:
2Overview
2.1. General Description
The XEV22D controller is capable of driving a
wide variety of stepper electronic expansion valves.
The controller regulates the superheat (SH) of the flu-
id that runs into the refrigeration unit to obtain opti-
mized performance and functioning of the evaporator
independent of climate or load conditions.
XEV22D controllers are equipped with two (2)
probe inputs, one for a 4 to 20mA (or 0 to 5V) pres-
sure transducer and another one for a Pt1000 or NTC
temperature probe.
The LAN connection transmits the pressure signal
to the other XEVs; this allows the use of only one
pressure transducer in multiplexed cabinet applica-
tions. The controller can also have two (2) configu-
rable digital inputs, the first one is free of voltage and
the other one is at high voltage, to simplify connec-
tions with cooling request signal.
With the integrated display, it is possible to see the
superheat (SH) value, the degree of valve opening, or
the probe values; the local keyboard enables the con-
troller to be programmed without any other devices.
An RS485 serial link connects the controller to
other Emerson monitoring and supervising systems.
2.2. Ordering Code
CAUTION!
• This manual is part of the product and
should be kept near the controller for easy and
quick reference.
• The controller should not be used for purposes
different from those described in this manual. It can-
not be used as a safety device.
• Check the application limits before proceeding.
SAFETY PRECAUTIONS AND
WARNINGS!
• Check that the supply voltage is correct
before connecting the controller.
• Do not expose to water or moisture: use the con-
troller only within the operating limits and avoid sud-
den temperature changes with high atmospheric
humidity to prevent condensation from forming.
• Warning! Disconnect all electrical connections
before performing any kind of maintenance.
• Fit the probe where it is not accessible by the end
user. The controller must not be opened.
• In case of failure or faulty operation, send the
controller back to Retail Solutions (see address) with a
detailed description of the fault.
• Verify the maximum current that can be applied
to each relay (see Section 15, Specifications).
• Ensure that the wires for probes, loads, and the
power supply are separated and far enough from each
other, without crossing or intertwining.
• In case of applications in industrial environ-
ments, the use of main filters (our mod. FT1) in paral-
lel with inductive loads could be useful.
Device
Name
Dixell Code
Emerson
Code
XEV22D
XEV22D-1C0F0B
X0JFGAESG3NA-000
318-5001
Table 2-1 - Product Ordering Code
Zobrazit stránku 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Komentáře k této Příručce

Žádné komentáře

Vivitek Projectors user manuals

Starting on H

Click on an alphabet below to scroll to the full list of models starting with that letter

Models Document Type
H1082
Specifications   Vivitek H1082 Specifications, 50 pages
H118x Series
User Manual   1. - Vivitek, 62 pages
Specifications   Vivitek H118x Series Specifications, 50 pages
H118x series
User Manual   Инструкция по эксплуатации Vivitek H118x series, 62 pages
H5080
User Manual   HOME THEATER PROJECTOR Professional [en] , 1 pages
H9080FD
User Manual   Projektor Vivitek H9080FD, 2 pages