Emerson MICRO MOTION 2700 Instalační manuál stáhnout pdf (Strana 182)

172 Transmitter Configuration and Use: Series 1000 and 2000 Transmitters

Configuring the Enhanced Density Application continued

D.7 Modifying a density curve

An existing density curve may be modified. The following parameters can be modified without

affecting the enhanced density calculations:

• Curve name

• Concentration unit label and optional text string

• Extrapolation alarm limit

Note: As the value for extrapolation alarm limit is increased, the probability of inaccurate enhanced

density calculations also increases. Micro Motion recommends using the default value for

extrapolation alarm limit.

Do not change any other parameters. In particular, if you change the derived variable, all data are

erased for all existing curves.

D.8 Saving a density curve

Micro Motion recommends that all curves be saved to a file.

To save a curve to a file:

1. In the

ProLink/Configuration window, click on the ED Setup tab.

2. Use the

Curve being configured dropdown list to specify the curve to save, and click Apply.

3. Click the

Save this curve to a file button and specify the file name and location.

4. Repeat these steps for all density curves on your transmitter.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 263 264

Žádné komentáře

Emerson MICRO MOTION 2700 Instalační manuál Strana 182