Emerson 3051S Specifikace stáhnout pdf (Strana 10)

Reference Manual

00809-0200-4801, Rev CA

July 2010

Rosemount 3051S

1-2

Service Support To expedite the return process outside of the United States, contact the

nearest Emerson Process Management representative.

Within the United States, call the Rosemount National Response Center using

the 1-800-654-RSMT (7768) toll-free number. This center, available 24 hours

a day, will assist you with any needed information or materials.

The center will ask for product model and serial numbers, and will provide a

Return Material Authorization (RMA) number. The center will also ask for the

process material to which the product was last exposed.

Rosemount National Response Center representatives will explain the

additional information and procedures necessary to return goods exposed to

hazardous substances.

DEVICE DESCRIPTION Before configuring the device, ensure the host has the appropriate Device

Description file revision for this device. The device descriptor can be found on

www.fieldbus.org. The initial release of the Rosemount 3051S with

OUNDATION fieldbus protocol is device revision 20. This manual is for revision

23.

NODE ADDRESS The transmitter is shipped at a temporary (248) address. This will enable

OUNDATION fieldbus host systems to automatically recognize the device and

move it to a permanent address.

TAGGING Commissioning Tag

The 3051S has been supplied with a removable commissioning tag that

contains both the Device ID (the unique code that identifies a particular device

in the absence of a device tag) and a space to record the device tag

(PD_TAG) (the operational identification for the device as defined by the

Piping and Instrumentation Diagram (P&ID)).

When commissioning more than one device on a fieldbus segment, it can be

difficult to identify which device is at a particular location. The removable tag,

provided with the transmitter, can aid in this process by linking the Device ID

to its physical location. The installer should note the physical location of the

transmitter on both the upper and lower location of the commissioning tag.

The bottom portion should be torn off for each device on the segment and

used for commissioning the segment in the control system.

Individuals who handle products exposed to a hazardous substance can avoid injury if

they are informed of and understand the hazard. If the product being returned was

exposed to a hazardous substance as defined by OSHA, a copy of the required Material

Safety Data Sheet (MSDS) for each hazardous substance identified must be included

with the returned goods.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 239 240

Žádné komentáře

Emerson 3051S Specifikace Strana 10