Emerson 3051S Specifikace stáhnout pdf (Strana 115)

Reference Manual

00809-0200-4801, Rev CA

July 2010

A-5

Rosemount 3051S

DOWNLOAD_

MODE

67 0 - 2 1 E Gives access to the boot block code for over the wire

downloads

0 = Uninitialized

1 = Run Mode

2 = Download Mode

RECOMMENDE

D_ACTION

68 0 E Read

Only

Enumerated list of recommended actions displayed with a

device alert.

FAILED_PRI 69 0 - 15 0 N/A Designates the alarming priority of the FAILED_ALM.

FAILED_ENABLE 70 0 E Read

Only

Enabled FAILED_ALM alarm conditions. Corresponds bit for

bit to the FAILED_ACTIVE. A bit on means that the

corresponding alarm condition is enabled and will be

detected. A bit off means the corresponding alarm condition is

disabled and will not be detected.

FAILED_MASK 71 See Table 25 0 E Mask of FAILED_ALM. Corresponds bit of bit to

FAILED_ACTIVE. A bit on means that the condition is

masked out from alarming.

FAILED_ACTIVE 72 0 E Read

Only

Enumerated list of failure conditions within a device.

FAILED_ALM 73 N/A Alarm indicating a failure within a device which makes the

device non-operational.

MAINT_PRI 74 0 - 15 0 N/A Designates the alarming priority of the MAINT_ALM

MAINT_ENABLE 75 0 E Read

Only

Enabled MAINT_ALM alarm conditions. Corresponds bit for

bit to the MAINT_ACTIVE. A bit on means that the

corresponding alarm condition is enabled and will be

detected. A bit off means the corresponding alarm condition is

disabled and will not be detected.

MAINT_MASK 76 See Table 26 0 E Mask of MAINT_ALM. Corresponds bit of bit to

MAINT_ACTIVE. A bit on means that the condition is masked

out from alarming.

MAINT_ACTIVE 77 0 E Read

Only

Enumerated list of maintenance conditions within a device.

MAINT_ALM 78 N/A Alarm indicating the device needs maintenance soon. If the

condition is ignored, the device will eventually fail.

ADVISE_PRI 79 0 - 15 0 N/A Designates the alarming priority of the ADVISE_ALM

ADVISE_

ENABLE

80 0 Read

Only

Enabled ADVISE_ALM alarm conditions. Corresponds bit for

bit to the ADVISE_ACTIVE. A bit on means that the

corresponding alarm condition is enabled and will be

detected. A bit off means the corresponding alarm condition is

disabled and will not be detected.

ADVISE_MASK 81 See Table 27 0 E Mask of ADVISE_ALM. Corresponds bit of bit to

ADVISE_ACTIVE. A bit on means that the condition is

masked out from alarming.

ADVISE_ACTIVE 82 0 E Read

Only

Enumerated list of advisory conditions within a device.

Parameter Index Valid Range Initial Value Units Other Description

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 239 240

Komentáře k této Příručce

Žádné komentáře

Emerson 3051S Specifikace Strana 115

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Emerson 3051S