Emerson 3051S Specifikace stáhnout pdf (Strana 114)

Reference Manual

00809-0200-4801, Rev CA

July 2010

Rosemount 3051S

A-4

HARDWARE_

REV

52 3 N/A Read

Only

Hardware revision of that hardware that has the resource

block in it.

OUTPUT_

BOARD_SN

53 set by mfgr N/A Read

Only

Output board serial number.

FINAL_ASSY_

NUM

54 set by mfgr N/A Read

Only

The same final assembly number placed on the neck label.

DETAILED_

STATUS

55 See Table 22 E Read

Only

Indicates the state of the transmitter.

SUMMARY_

STATUS

56 0:Uninitialized

1: No repair

needed.

2: Repairable

3: Call service

center

0 E Read

Only

An enumerated value of repair analysis.

MESSAGE_

DATE

57 0 N/A Date associated with the MESSAGE_TEXT parameter

MESSAGE_

TEXT

58 spaces N/A Used to indicate changes made by the user to the device’s

installation, configuration, or calibration.

SELF_TEST 59 0:

Uninitialized

1: No test

2: Self test

1 E Used to self test the device. Tests are device specific.

DEFINE_WRITE

_LOCK

60 0:

Uninitialized

1: Everything

Locked

2: Only

physical

device locked

1 E Allows the operator to select how WRITE_LOCK behaves.

The initial value is “lock everything”. If the value is set to “lock

only physical device” then the resource and transducer blocks

of the device will be locked but changes to function blocks will

be allowed.

SAVE_CONFIG_

NOW

61 0:

Uninitialized

1: No save

2: Burn

EEPROM with

latest values

1 E Allows the user to optionally save all non-volatile information

immediately.

SAVE_CONFIG_

BLOCKS

62 0 N/A Read

Only

Number of EEPROM blocks that have been modified since

last burn. This value will count down to zero when the

configuration is saved.

START_WITH_

DEFAULTS

63 0-4 1 E 0 = Uninitialized

1 = do not power-up with NV defaults

2 = power-up with default node address

3 = power-up with default pd_tag and node address

4 = power-up with default data for the entire communications

stack (no application data)

SIMULATE_IO 64 0:

Uninitialized

1: Off

2: On

0 E Read

Only

Status of Simulate jumper/switch

SECURITY_IO 65 0:

Uninitialized

1: Off

2: On

0 E Read

Only

Status of Security jumper/switch

SIMULATE_

STATE

66 0 - 3 1 E Read

Only

The state of the simulate jumper

0 = Uninitialized

1 = Jumper/switch off, simulation not allowed

2 = Jumper/switch on, simulation not allowed (need to cycle

jumper/switch)

3 = Jumper/switch on, simulation allowed

Parameter Index Valid Range Initial Value Units Other Description

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 239 240

Komentáře k této Příručce

Žádné komentáře

Emerson 3051S Specifikace Strana 114

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Emerson 3051S