Emerson 3051S Specifikace stáhnout pdf (Strana 26)

Reference Manual

00809-0200-4801, Rev CA

July 2010

Rosemount 3051S Series

2-12

1. Loosen the housing rotation set screw.

2. First rotate the housing clockwise to the desired location. If the desired

location cannot be achieved due to thread limit, rotate the housing

counter clockwise to the desired location (up to 360° from thread limit).

3. Retighten the housing rotation set screw.

In addition to housing rotation, the optional LCD display can be rotated in

90-degree increments by squeezing the two tabs, pulling out, rotating and

snapping back into place.

NOTE

If LCD pins are inadvertently removed from the interface board, carefully

re-insert the pins before snapping the LCD display back into place.

Configure Security The 3051S FOUNDATION fieldbus transmitter has a hierarchy of security. The

SECURITY switch located on the electronics provides the highest level of

security. In the ON position, all writes to the transmitter are disabled.

Simulate The SIMULATE switch is located on the Electronics. It is used in conjunction

with the transmitter simulate software to simulate process variables and/or

alerts and alarms. To simulate variables and/or alerts and alarms, the

SIMULATE switch must be moved to the ENABLE position and the software

enabled through the host. To disable simulation, the switch must be in the

DISABLE position.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 239 240

Žádné komentáře

Emerson 3051S Specifikace Strana 26